HobbyKing
SE.5A SCALE WWI WARBIRD (55.4IN)
| Wing Span | 1408mm (55.4in) |
| Length | 1118mm (44in) |
| Weight | 2300g |
| Wing Area | 46.83dm2 |
| ESC | 60A |
| Radio | Your own Tx/Rx |
| Engine | .40~.46 Glow |
| Battery | RX Battery |
| Radio | Your own Tx/Rx |
| Fuel Tank | 320cc (Included) |
Specs:, EP Setup:, Motor:, 42xx 700kv Brushless Outrunner, Battery:, 3s~4s 3300mAh Lipoly, Servos:, 4 Standard size servos, Glow Setup:, Servos:, 4 Standard size servos,
Considered by many to be the best British single seat ...5 Reviews
HobbyKing
LARGE SCALE 3D YAK54 30CC (ARF)
| Wing Span | 1830mm (72in) |
| Length | 1767mm (70in) |
| Flying Weight | 4~4.5kg |
| Engine | 30cc (Required) |
| Engine | 30cc |
Specs:, Wing Area:, 58 Sq.dm (904 sq in), Radio:, 6 Channel (Required), Required:, Radio:, Your own Tx/RX (6 Channel), Servos:, 6 Standard (High Torque MG), Prop:, 20x8in Prop and Spinner, Special shipping considerations:, -Sorry, we cannot ship this item to USA. It is too large.,
The HobbyKing Yak54 30cc Large Scale 3D aircraft is constructed ...5 Reviews
HobbyKing
1:5 SCALE NITRO RC MOTOR BIKE READY TO GO
| Features | 100% factory built |
| Specs | Length |
| Width | 120mm (without gaurd wires) |
| Height | 260mm |
| Weight | 1,874 grams (Ready to run) |
This 1:5 Scale Nitro RC Bike comes with dual front friction-damped forks as well as adaptable rear oil filled monoshocks. It's Aluminium side frames which are tough as well as rigid make this bike responsive, light and quick. This Nitro RC Bike is 100% factory assembeled and ready to run, powered by a Sanye .15 gas engine, also included is the 2 high speed servos for greater control. Just include your RX and battery to power up the receiver and the servos, Don't forget to fill up the fuel tank!,
Factory painted Ducati 999R bodywork powerful .15 Nitro engine Front ...5 Reviews
HobbyKing
HOBBYKING KATANA .46 EP 1400MM (ARF)
| Wingspan | 1400mm |
| Length | 1310mm |
| Wing Area | 36g/dm2 |
| Suggested Prop | 12x8~14x10 |
Specs:, Flying Weight:, 2250g~2400g (with .46 engine), Requires:, Your Own 6 Channel TX/,
This high quality Katana has been built to satisfy both ...5 Reviews
HobbyKing
HOBBYKING NEMESIS .60 1700MM (ARF)
| Wing Span | 66.9in/1700mm |
| Wing Area | 50sq.dm |
| Length | 57in/1450mm |
| Flying Weight | 3000g |
| Battery | Receiver pack |
Note:, This is a glow engine model, some modelling experiance will be required for an EP conversion. A CD-Rom is included with the model that contains a detailed building guide for a glow setup., Specs:, Glow setup:, Radio:, 4channels 5 std. servos (Required), Engine:, 2cycle .60 or 4cycle .91 (Required), EP Setup:, Radio:, 4Channels 4 std. Servos (Required), Motor:, .60 Glow Equivalent (Turnigy EasyMatch G60 300~500kv) (Required), Battery:, 5000~6000mAH 5~6S Lipoly Battery (Required), ESC:, 80~100A (Separate BEC is recommended on large Models) (Required),
In air racing terms, there were planes built for going ...5 Reviews
HobbyKing
TURBORAVEN 0.60 EP/GLOW 1580MM (ARF)
| Wingspan | 1580mm |
| Length | 1440mm |
| Flying Weight | 3000g |
| Includes | Engine Mount |
Specs:, Engine:, 0.60 2 stroke or EP equivalent (not included), Requires:, Your own 4~6 Channel TX/RX,
This superb Turboraven really looks the part and is something ...5 Reviews
HobbyKing
BOEING P-26A PEASHOOTER EPO 800MM (PNF)
| Span | 800mm |
| Length | 682mm |
| Weight | 600g |
| Motor | 1200kv Outrunner |
| ESC | 20 w/BEC |
| Servo | 9g x 4 |
| Requires | 4 Channel Radio |
Features:, High level of scale detail including Dummy Radial Engine, Specs:,
The Boeing P-26 was the first American all-metal production fighter ...5 Reviews
HobbyKing
CRI-CRI MC-15 SCALE MICROLIGHT 1778MM BALSA ARF
| Features | • CF Wing Tube |
| Wingspan | 1778mm |
| Length | 1400mm |
| Wing Area | 39.3 dm2 |
| Flying Weight | 3000g |
| Includes | Instruction Manual |
| Requires | Your own 6ch TX/RX |
Our model of the Cri-cri is based on the MC-15 model (which is powered by 15hp JPX single cylinder 2 stroke engines), with a span of 1778mm it is actually 1:2.75 scale - slightly larger than 1/3 scale! The model is constructed from high quality balsa and light ply which ensures a strong, rigid - yet light weight airframe. Its engine nacelles are moulded fibreglass units. Its tricycle under carriage is very strong, featuring a steerable nose-wheel and painted fibreglass wheel pants. Covered in glossy Oracover with an authentic colour scheme she certainly looks the part!, Specs:,
Possibly one of the most unusual scale models you will ...5 Reviews
HobbyKing
HOBBYKING EDGE 540 GAS 30CC 1868MM (ARF)
| Wingspan | 1868mm |
| Length | 1576mm |
| Wing Area | 66.5dm2 |
| Flying Weight | 4200g |
Specs:, Engine:, 26cc (sport) ~ 30cc (3D) Gas Engine (not included), Requires:, Your Own 6 Channel TX/RX,
This stunning looking Edge 540 is a pure, mean, 3D ...HobbyKing
QUANUM TOXIC NITRO 1/10TH 4WD RACING BUGGY (ARR)
| Height | 170mm |
| Length | 430mm |
| Wheelbase | 280mm |
| Track F/R | 250mm |
| Ground Clearance | 27mm |
| Engine | SH .18 Nitro |
| Cubic Capacity | 2.74cc |
| Bore | 15.90mm |
| Stroke | 14.70mm |
| R.P.M | 29000 |
| Power | 1.0hp |
| Weight | 2.02kg |
Features:, • 1/10 Scale Nitro Powered Car, Specs:, Requires:, Your Own 2 channel Radio System,
The Toxic Nitro is the latest Quanum 1/10th Rally Cross ...5 Reviews
HobbyKing
STINSON SR-9 30CC BALSA 2180MM (ARF)
| Empty Weight | 30CC Gas Engine |
Wingspan:, Length:,
The Stinson Reliant was a popular single-engine four to five ...HobbyKing
TZ-V2 .90 SIZE NITRO 3D FLYBARLESS COMPETITION HELICOPTER KIT (BELT DRIVE)
| Radio Gear | Transmitter with heli mixing and receiver |
| Rx Battery | (UBEC with 2~3 Cell Lipoly) |
Length:, Height:, Width:, Gear ratio:, Pinion gear:, Main gear:, Main rotor diameter:, Tail rotor diameter:, Main rotor length:, Flying weight:, Control System:, Tail Rotor Drive System:, Nitro engine and muffler (.90),
The TZ V2 .90 is a Nitro .90 size helicopter ...HobbyKing
HITEC HS-485HB DELUXE SERVO 4.8KG/45G/0.22SEC
| Applications | Helis and Aircraft up to 72 or up to 12lbs when using just one servo per control surface. |
| Motor Type | 3 Pole |
| Bearing Type | Top BB |
| Speed @ 4.8v | 0.22 sec @ 60 deg. |
| Speed @ 6v | 0.18 sec @ 60 deg. |
| Torque @ 4.8v | 4.8 kg.cm |
| Torque @ 6v | 6 kg.cm |
| Size | 39.8 x 19.8 x 38mm |
| Weight | 45g |
Features:, Note:, Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Warning:, Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail., Specifications:,
Hitec HS-485HB Deluxe servo 4.8kg/45g/0.22sec HS-485HB updates the very popular ...5 Reviews
HobbyKing
PREDATOR UAV 74IN SPY PLANE ARF
| Wing Span | 74in |
| Wing Area | 370sq in |
| Weight | 560g |
| Length | 34in |
| Speed 400 Size | 28-** Outrunner |
| Radio Required | 4Ch / 4 Servos |
Engine Required:,
Predator UAV 74in Spy Plane ARF The Predator scale model ...5 Reviews
HobbyKing
DSR-46BW ELECTRIC RETRACT SET - MODELS UP TO 3.6KG
| Leg Length (Pin to axle) | 134mm (4mm wire) |
| Pin diameter | 5mm |
| Retract Screw Spacing | 40mm x 33mm |
| Operating Voltage | 6v~7.4v |
| Wheel Size | 57mm x 21 mm |
| Included | Control Unit |
Specifications:, Weight:, 194g (all components), Note:, The EPF series of retracts are a high quality, well engineered product manufactured in Taiwan.,
The EPF DSR-46BW Electric Retract set contains everything you need ...3 Reviews